3 d printing transparent samples are how to do better?
3 d printing transparent samples are how to do better print effect?
3 d printing factory in Shanghai a few practical 3 d printing tips to make your 3 d printing effect is better.
< br /> these tips, if you are able to better grasp and use, will make your 3 d printers, 3 d printing effect is better.
< br /> a, your own design printing base, avoid to use in the design of support materials, while support with algorithms over time has been progress, but still after removing support material can make some mark on the model, the process of removing will be time-consuming.
So there is no support material with the help of the design of 3 d printing transparent sample model, make it can be 3 d printing directly.
< br /> < br /> remember rule 45 degrees, any more than 45 degrees protrusions need extra support materials or sophisticated modeling techniques to complete the model to print, design your own support or link objects (
A cone or other supporting materials)
And to design them into your model.
< br /> 3, adjust the printing direction in order to fit the accuracy of the forever as your model to the resolution of the feasible direction to print direction.
If necessary, the model can be cut into several blocks to print, and then reassembled.
< br /> 4, adjust the direction of the print, according to sources of pressure force exerted on the model, we need to keep the model will not damaged.
Make sure you print direction to reduce the stress concentration in some areas, we can adjust the direction of the print to print the line perpendicular to the stress model.
The same principle can be applied to commonly used to print on large models of ABS resin, in the process of printing, the large models may be because of the on the print table cooling cracks along the Z axis direction.