Bofeng - A leading Rapid Prototyping Service Company

info@bofongrapid.com       

How to improve the machining precision of rapid prototyping method

by:Bofeng     2020-10-27
How to improve the machining precision of rapid prototyping method

< br />

1, the system of rapid prototyping technology to adjust

< br />

1) Try cutting method to adjust the

< br />

cut through the test Measuring size - Turning to adjust the knives Feed cutting - Try cutting and so on until you reach the required size.

this method the production efficiency is low, it is mainly used for single small batch customization and small batch manufacture

< br />

2) Adjustment method

through adjust the machine in advance, fixture, the relative position of workpiece and tool to obtain the required size. This method high productivity, is mainly used for small batch trial production and small batch customization.

< br />

2, and reduce the error of machine tool

< br />

1) Improve the manufacturing precision of the spindle assembly

should enhance the rotation accuracy of bearing:

< br />

a, choose high precision rolling bearings

two, with high precision more oil is woven

three dynamic pressure bearing, using high precision hydrostatic bearing,

< br />

should improve the accuracy of and bearing accessories:

< br />

a, improve housing support hole, the machining precision of the spindle shaft neck;

two, improve the machining accuracy of to match the bearing surface;

3, measurement and adjust the corresponding range of radial runout, make or phase offset error compensation.

< br />

( 2) For rolling bearing preloaded appropriate

< br />

a, can eliminate the gap;

2, increase the bearing stiffness;

3, homogenizing rolling element error.

< br />

3, reduce the transmission chain error

1) Drive less number, transmission chain is short, high driving accuracy;

( 2) By slow down transmission, the transmission accuracy is the key principle, and the closer it gets to the end of the drive, the smaller the ratio should be

3) Ends should be higher than other transmission precision parts.

< br />

4, reduce tool wear

< br />

in front of the cutting tool wear size of sharp wear stage will have to change again.

< br />

< br />


is frequently used by people in daily life since it can improve 3d printing service and 3d printing service.
Bofeng Rapid Prototype Technology Co., Ltd. builds value for our investors through the strength of our customers’ satisfaction and by consistently producing superior operating results.
Bofeng Rapid Prototype Technology Co., Ltd. offers the best for indoor as well as outdoor use. To find your ideal at attractive offers, visit us at Bofeng Rapid Prototype.
We sells Products and focus on operational procedure and manufacturing facilities 3d printing service.
There are multiple advantages of having a 3d printing service Products from responsible drilling machine exporters such as Bofeng Rapid Prototype Technology Co., Ltd., as they adhere to all the quality standards as you can list and supply all 3d printing service essential for the operation of the device without any difficulty.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
We will get back to you ASAP