Silicone coated with the characteristics of rapid mould making steps
2. Small shrinkage rate, no deformation, shrinkage in two over one thousand. If the contract is very big, the product will become smaller, deformation when other liquid into a solid.
3. High temperature resistant < br / > note: as a matter of fact, the silicone request mould flip the more the better. < br / >
silicone coated using silica gel details: < br / > fast mold silicone series of silica gel for liquid flow, whatever the color, the same quality, component A as the flow of liquid, component B as curing agent. First will die or reproduction processing good, take a certain amount of colloid, add 2 - 3% of curing agent. Used after mixing evenly, 2 - 3 hours, can cure. Has the advantages of no deformation, no shrinkage, high temperature resistant, can be repeatedly used after molding, products provide rapid replication, product shrinkage rate of up to two thousand, is mainly used for hand-board model and small bulk copy products. < br / > fast mold silicone smart technology: < br / > open mold way including the cladding mode, brush layer mode ( Subdivision model, the three-dimensional model, plane model) And filling mold, determined by the product size.
1. Cover mould: first of all, the thickness of 3 - 5 mm package on the mould seed layer of soil, made from plaster coating, remove the soil - Stain release material, the mixer pour silicone and curing agent with seed plaster mold, the coating curing.
2. Three layer brush brush way: general method is based on multilayer brush mould requirements. The first layer modulus and brush brush vacuum in place. The second layer coated with gauze. The third layer of the curing.
3. Molding: will mix silicone and curing agent into the mold surrounding containers, vacuum curing. Some can't directly out of the mould, cutting tools must be open and demoulding, make production smooth. < br / > < br / > < br / > fast mold silicone coated operation method: < br / > 1. Must deal with original model or you want to copy products. Because of copy products or model is not polishing and polishing, the actual model or the product itself is not A smooth or perfect, they are flowing liquid, component A is silica gel, component B is firming agent, made of silicone mold is not good enough, the actual casting products is not smooth.
2. Vacuum processing, according to certain proportion mixing silicone and curing agent, the vacuum processing time shoulds not be too long. Due to silicone and curing agent stirring time bubble, not vacuum processing, if take out bubbles, silicone mold to have multiple pores, directly affects the quality of the products.
3. Within the framework of silica gel into the mould will be empty. < br / > < br / >
Anxious in finding a solution to your Products issue? Click Bofeng Rapid Prototype to find a top 3d printing service Products company offering top quality .
As a global Products company, we take on some of the world’s biggest Products challenges. Bofeng Rapid Prototype Technology Co., Ltd. have a whole series of 3d printing service Products that can solve your Products problem in an effective manner. Check it at Bofeng Rapid Prototype.
It is never too late to have a new mindset and to get things moving in the right direction. Choose Bofeng Rapid Prototype Technology Co., Ltd. to be your quality provider.
Bofeng Rapid Prototype Technology Co., Ltd. deems that we can drive consumer transactions using high-tech tools like artificial intelligence and cognitive data sets.