Piecemeal print just as its name implies is originally the whole hand-board model, need to tear open come out a print, final assembly.
There are three kinds of situation is need to open a print.
< br /> the first is a quick sample is too large, 3 d printing stroke enough < br /> print a large model, for example, because the volume is too large, 3 d printers print is not a one-time model, the size of separation is required to play at this moment.
Such as this model is a human body model, are likely to separate the head, body, arms and legs to print.
< br /> 3 d printing and CNC machining
at the time of processing has a size limit, is limited by the size of the machine, the machine can't only 1 m, but processing hand-board model of 2 meters.
< br /> different 3 d printing material piece maximum size of the 3 d print model are also different.
< br /> is the second structure machining not or can not meet the requirements of < br /> a boxy seal box, for example, there is a structure, need support, industrial grade 3 d printing can print sealed, but there will be a support, and customers don't want to have the support, this time we need to dismantle a print, remove the support.
< br /> again below glasses, frames and printed separately from the legs of the mirror, because a whole printing picture frame and its leg joints is together, can't flexible rotation, thus reach test this glasses hand-board model used.
Below glasses with planks are one print, of course, for, as the need to be flexible spinning device can also be by design, 3 d printing to realize in the end.
Here is just a reference.
< br /> , such as industrial grade 3 d printing photosensitive resin transparent, transparent photosensitive resin need polishing, if parts grinding can't affect transparency, this time can open a print, after grinding, glue again, choose shadowless glue, glue the part of the transparency is very good.
< br /> there is not using CNC machining parts, some small parts are CNC dao gong not, need to open a processing.
< br /> piecemeal printing costs will be lower, for a third industrial 3 d printing rarely exist within the scope of printable piecemeal cheaper printing, because industrial 3 d printing is to add material manufacturing, in addition to the necessary supporting materials, the rest is used to print model material, and 3 d printing does not exist complex model processing costs much more.
< br /> after the piecemeal print any part need to use glue for adhesive, piecemeal with glue is then will leave traces of glue, is a patchwork.
If the industrial-grade hand do model of 3 d printing is do verify appearance, actually not much, because the hand reproduce model after the glue mark cannot be seen.
If do functional verification may be affected by a little stress can influence a little because it is over, what does this have to as functional testing, of course, depends on the hand do model of the structure, purpose and use of materials.
< br /> < br /> about piecemeal print can be timely communication with rapid manufacturing
services company, tell the requirements to rapid manufacturing services company, this 3 d printed hand model reach was satisfied, do not affect the use.
< br /> at the moment, you can print the largest size is 1.
For enquiry rapid manufacturing services company.
Thank you very much!
< br /> < br />
Clouds of 3d printing service failures surround the world of 3d printing service in particular, simply because people don’t pay as much attention to the Products as they should do.
Bofeng Rapid Prototype Technology Co., Ltd. also maintains a friendly, fair, and creative work environment, which respects diversity, new ideas, and hard work.
Bofeng Rapid Prototype Technology Co., Ltd. has developed a unique technology with many applications including 3d printing service.