Bofeng - A leading Rapid Prototyping Service Company

info@bofongrapid.com       

Which three of the hand-board model is need to open a 3 d printing

by:Bofeng     2020-10-28
< br / >

piecemeal print just as its name implies is originally the whole hand-board model, need to tear open come out a print, final assembly. There are three kinds of situation is need to open a print.

the second is not the structure of special processing or processing can not meet the requirements of

< br / >

a boxy seal box, for example, there is a structure, need support, 3 d printing can print sealed, but there will be a support, and customers don't want to have the support, this time we need to dismantle a print, remove the support.

< br / >

again below glasses, frames and printed separately from the legs of the mirror, because a whole printing picture frame and its leg joints is together, can't flexible rotation, thus reach test this glasses hand-board model used. Below glasses with planks are one print, of course, for, as the need to be flexible spinning device can also be by design, 3 d printing to realize in the end. Here is just a reference.

< br / >

, such as 3 d printing transparent photosensitive resin, transparent photosensitive resin need polishing, if parts grinding can't affect transparency, this time can open a print, after grinding, glue again, choose shadowless glue, glue the part of the transparency is very good.

< br / >

there is not using CNC machining parts, some small parts are CNC dao gong not, need to open a processing.

< br / >

and the third is a piecemeal process may be more cheap

3 d printing rarely exist within the scope of printable piecemeal cheaper printing, because the 3 d printing is increasing material manufacturing, in addition to the necessary supporting materials, the rest is used to print model material, and 3 d printing does not exist complex model processing costs much more.

< br / >

after the piecemeal print any part need to use glue for adhesive, piecemeal with glue is then will leave traces of glue, is a patchwork. If the hand of 3 d printing to do model is do verify appearance, actually not much, because the hand reproduce model after the glue mark cannot be seen. If do functional verification may be affected by a little stress can influence a little because it is over, what does this have to as functional testing, of course, depends on the hand do model of the structure, purpose and use of materials.

< br / >

< br / >

about dismantling the print to the new group laser timely communication, tell the requirements to the new laser, this 3 d printed hand-board model is satisfied, do not affect the use.


The use and installation of Products is compared with most other systems for managing the 3d printing service effectively and no doubt Products have won the race so many times.
Best in Bofeng Rapid Prototype Technology Co., Ltd. can handle all sorts of 3d printing service with good efficiency while providing ensured quality. Here you can find so as to solve your 3d printing service issues.Go to Bofeng Rapid Prototype to get fixed.
To deal with commercial threats, Bofeng Rapid Prototype Technology Co., Ltd. konws that the notion of proactively seeking out potential or looming external threats against a company is gaining traction.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
We will get back to you ASAP